eepyPad/ergogen/config.yaml

# Ergogen config for the eepyPad

# Metadata
meta:
  # Required version of Ergogen
  engine: "4.0.0"
  # Version of the board
  version: "1.0"
  author: binaryDiv

# Define units and default values used throughout this file
units:
  # Redefine choc units (keycap size + 1mm clearance)
  cx: 18.5
  cy: 17.5

  # Size of key rectangle in demo view (keycap size)
  $default_width: cx-1
  $default_height: cy-1

  # Actual spacing of keys
  $default_spread: cx
  $default_padding: cy

# Define the points (i.e. keys)
points:
  key:
    tags: [ is_key ]

  zones:
    pad:
      # Set anchor to fix placement on KiCad sheet
      anchor:
        shift: [ 100, -150 ]

      # Key rows (from bottom to top)
      rows:
        one:
          row_net: P5
        two:
          row_net: P6
          tags: [ is_key, flip_led ]
        three:
          row_net: P7
        four:
          row_net: P8
          tags: [ is_key, flip_led ]
        five:
          row_net: P9

      # Key columns (from left to right)
      columns:
        one:
          key.column_net: P18
          rows.one.led_din_net: led_dout_two_one
          rows.two.led_din_net: led_dout_one_three
          rows.three.led_din_net: led_dout_two_three
          rows.four.led_din_net: led_dout_one_five
          rows.five.led_din_net: led_dout_two_five
        two:
          key.column_net: P15
          rows.one.led_din_net: led_dout_three_one
          rows.two.led_din_net: led_dout_one_two
          rows.three.led_din_net: led_dout_three_three
          rows.four.led_din_net: led_dout_one_four
          rows.five.led_din_net: led_dout_three_five
        three:
          key.column_net: P14
          rows.one.led_din_net: led_dout_four_one
          rows.two.led_din_net: led_dout_two_two
          rows.three.led_din_net: led_dout_four_three
          rows.four.led_din_net: led_dout_two_four
          rows.five.led_din_net: led_dout_four_five
        four:
          key.column_net: P16
          rows.one.led_din_net: led_dout_five_one
          rows.two.led_din_net: led_dout_three_two
          rows.three.led_din_net: led_dout_five_three
          rows.four.led_din_net: led_dout_three_four
          rows.five.led_din_net: P19
        five:
          key.column_net: P10
          rows.one.led_din_net: led_dout_five_two
          rows.two.led_din_net: led_dout_four_two
          rows.three.led_din_net: led_dout_five_four
          rows.four.led_din_net: led_dout_four_four
          # Upper right corner: Rotary encoder instead of key
          rows.five:
            width: 20.5
            height: 20.5
            shift: [ 1.5, 2 ]
            tags: [ is_rotary_encoder ]

# Generate outlines that can be used in the PCB and for 3D models
outlines:
  # Outline of the key caps
  keys:
    - what: rectangle
      where: is_key
      size: [ cx-1, cy-1 ]

  # Rotary encoder with knob (2cm)
  # TODO: Not sure about the size and position yet
  rotary_encoder:
    - what: rectangle
      operation: stack
      size: [ 14, 14 ]
    - what: circle
      operation: stack
      radius: 10

  # Maximum size of PCB (100x100mm to keep it cheap) for visualization
  _max_outline:
    - what: rectangle
      where: pad_three_one
      size: [ 100, 100 ]
      adjust.shift: [ 0, 50 - 0.5cx ]

  # Outline for the PCB
  board:
    - what: rectangle
      where: pad_three_one
      size: [ 100, 100 ]
      adjust.shift: [ 0, 50 - 0.5cx ]
      fillet: 4

  # Preview version of board with key caps and components for visualization
  board_preview:
    - board
    - ^keys
    - ^_max_outline
    # Pro Micro board
    - what: rectangle
      operation: stack
      where: pad_five_five
      size: [ 18, 32 ]
      adjust.shift: [ 0, 5 ]
    # Rotary encoder (component)
    - what: outline
      name: rotary_encoder
      operation: stack
      where: is_rotary_encoder

  # Cutouts for the switches
  switch_cutouts:
    - what: rectangle
      where: true
      size: 14

  # Board outline with switch cutouts
  switch_plate:
    - board
    - -switch_cutouts

# Generate the PCB
pcbs:
  eepypad:
    outlines:
      main:
        outline: board

    footprints:
      choc_hotswap:
        what: choc_pretty
        where: is_key
        # Rotate footprint so that the hotswap socket is at the bottom and the LED can be at the top
        adjust.rotate: 180
        params:
          keycaps: true
          hotswap: true
          from: "{{colrow}}"
          to: "{{row_net}}"

      rotary_encoder:
        what: rotary_modified
        where: is_rotary_encoder
        adjust.rotate: 90
        params:
          from: "{{colrow}}"
          to: "{{row_net}}"
          A: P3
          B: P4
          C: GND

      diode:
        what: diode_smd
        where: is_key
        adjust:
          shift: [ 5, -2.5 ]
          rotate: 180
        params:
          side: B
          from: "{{colrow}}"
          to: "{{column_net}}"

      diode_rotary_encoder:
        $extends: pcbs.eepypad.footprints.diode
        where: is_rotary_encoder
        adjust:
          shift: [ 0, 0 ]
          rotate: 90

      led_pixel:
        what: sk6812_mini_e
        # Place unrotated LEDs in all rows without the flip_led tag
        where: [ [ is_key, -flip_led ] ]
        # Position LEDs on the LED hole in the Choc switches
        adjust.shift: [ 0, 4.7 ]
        params:
          side: B
          din: "{{led_din_net}}"
          dout: "led_dout_{{colrow}}"

      led_pixel_flipped:
        $extends: pcbs.eepypad.footprints.led_pixel
        # Place flipped (rotated by 180°) LEDs in all rows *with* the flip_led tag
        where: [ [ is_key, flip_led ] ]
        adjust.rotate: 180

      led_capacitor:
        what: cap_0805
        where: [ [ is_key, -flip_led ] ]
        adjust:
          shift: [ -6, 4.5 ]
          rotate: 90
        params:
          side: B
          from: VCC
          to: GND

      led_capacitor_flipped:
        $extends: pcbs.eepypad.footprints.led_capacitor
        where: [ [ is_key, flip_led ] ]
        adjust:
          shift: [ 6, 4.9 ]
          rotate: 270

      controller:
        what: promicro_modified
        where:
          ref: pad_five_five
          rotate: -90
          shift: [ 0, 3 ]
        params:
          orientation: down

      reset_button:
        what: button_6x6
        where:
          ref: pad_four_five
          shift: [ 0, 15 ]
        params:
          side: B
          from: GND
          to: RST

      # Mounting holes
      mounting_hole_top_left:
        what: mountinghole_m2
        where:
          ref: pad_one_five
          shift: [ -8, 15 ]

      mounting_hole_top_right:
        what: mountinghole_m2
        where:
          ref: pad_three_five
          shift: [ 8, 15 ]

      mounting_hole_bottom_left:
        what: mountinghole_m2
        where:
          ref: pad_one_one
          shift: [ -10.25, 0 ]

      mounting_hole_bottom_right:
        what: mountinghole_m2
        where:
          ref: pad_five_one
          shift: [ 10, -6 ]