Compare commits
3 Commits
db8e2af1ed
...
6bf16ac7fe
| Author | SHA1 | Date |
|---|---|---|
 Lexi / Zoe
|
6bf16ac7fe
|
|
|
Lexi / Zoe
|
eec05917c1
|
|
|
Lexi / Zoe
|
ed1b4b7632
|
|
|
@ -14,3 +14,7 @@ Custom ergonomic mechanical keyboard with low-profile (Choc) switches.
|
||||||
- [KiCad](https://www.kicad.org/)
|
- [KiCad](https://www.kicad.org/)
|
||||||
- [FreeCAD](https://www.freecad.org/)
|
- [FreeCAD](https://www.freecad.org/)
|
||||||
- [UltiMaker Cura](https://ultimaker.com/software/ultimaker-cura/)
|
- [UltiMaker Cura](https://ultimaker.com/software/ultimaker-cura/)
|
||||||
|
|
||||||
|
## Resources
|
||||||
|
|
||||||
|
- [FlatFootFox's Ergogen tutorial](https://flatfootfox.com/ergogen-introduction/)
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,497 @@
|
||||||
|
# Ergogen config for the eepyBoard
|
||||||
|
#
|
||||||
|
# Reference information:
|
||||||
|
# - Keycap size (FK MBK keycaps): 17.5mm x 16.5mm
|
||||||
|
|
||||||
|
# Metadata
|
||||||
|
meta:
|
||||||
|
# Required version of Ergogen
|
||||||
|
engine: "4.1.0"
|
||||||
|
# Version of the board
|
||||||
|
version: "1.0"
|
||||||
|
author: binaryDiv
|
||||||
|
|
||||||
|
# Define units and default values used throughout this file
|
||||||
|
units:
|
||||||
|
# Redefine choc units (keycap size + 1.5mm clearance)
|
||||||
|
cx: 19
|
||||||
|
cy: 18
|
||||||
|
|
||||||
|
# Size of keycaps
|
||||||
|
kcx: 17.5
|
||||||
|
kcy: 16.5
|
||||||
|
|
||||||
|
# Size of key rectangle in demo view (keycap size)
|
||||||
|
$default_width: 17.5
|
||||||
|
$default_height: 16.5
|
||||||
|
|
||||||
|
# Actual spacing of keys
|
||||||
|
$default_spread: cx
|
||||||
|
$default_padding: cy
|
||||||
|
|
||||||
|
# Vertical offset between function keys and primary keys
|
||||||
|
function_zone_offset: 3
|
||||||
|
|
||||||
|
# Define the points (i.e. keys)
|
||||||
|
points:
|
||||||
|
key:
|
||||||
|
# Tag all points as "is_key" unless overwritten
|
||||||
|
tags: [ is_key ]
|
||||||
|
|
||||||
|
zones:
|
||||||
|
# Primary keyboard zone
|
||||||
|
primary:
|
||||||
|
# Set anchor to fix placement on KiCad sheet
|
||||||
|
anchor:
|
||||||
|
shift: [ 100, -150 ]
|
||||||
|
|
||||||
|
# Key rows (from bottom to top)
|
||||||
|
rows:
|
||||||
|
# Modifier row (Ctrl, ..., but excluding the thumb keys)
|
||||||
|
mods:
|
||||||
|
row_net: GP13
|
||||||
|
led_previous_key: "{{zone.name}}_{{neighbor_col_left}}_{{row}}"
|
||||||
|
tags: [ is_key, flip_led ]
|
||||||
|
|
||||||
|
# Bottom letter row (Shift, ZXCV...)
|
||||||
|
bottom:
|
||||||
|
row_net: GP14
|
||||||
|
led_previous_key: "{{zone.name}}_{{neighbor_col_right}}_{{row}}"
|
||||||
|
|
||||||
|
# Middle/home letter row (Caps Lock, ASDFG...)
|
||||||
|
home:
|
||||||
|
row_net: GP15
|
||||||
|
led_previous_key: "{{zone.name}}_{{neighbor_col_left}}_{{row}}"
|
||||||
|
tags: [ is_key, flip_led ]
|
||||||
|
|
||||||
|
# Top letter row (Tab, QWERT...)
|
||||||
|
top:
|
||||||
|
row_net: GP16
|
||||||
|
led_previous_key: "{{zone.name}}_{{neighbor_col_right}}_{{row}}"
|
||||||
|
|
||||||
|
# Number row (`, 12345...)
|
||||||
|
numbers:
|
||||||
|
row_net: GP17
|
||||||
|
led_previous_key: "{{zone.name}}_{{neighbor_col_left}}_{{row}}"
|
||||||
|
tags: [ is_key, flip_led ]
|
||||||
|
|
||||||
|
# Key columns (from left to right)
|
||||||
|
columns:
|
||||||
|
# Left-most column (`, Tab, Caps Lock, Shift, Ctrl)
|
||||||
|
zero:
|
||||||
|
key.column_net: GP8
|
||||||
|
key.neighbor_col_right: one
|
||||||
|
rows.numbers.led_previous_key: function_esc_default
|
||||||
|
rows.home.led_previous_key: primary_zero_top
|
||||||
|
rows.mods.led_previous_key: primary_zero_bottom
|
||||||
|
# First letter column (1, Q)
|
||||||
|
one:
|
||||||
|
key.column_net: GP7
|
||||||
|
key.neighbor_col_left: zero
|
||||||
|
key.neighbor_col_right: two
|
||||||
|
# Second letter column (2, W)
|
||||||
|
two:
|
||||||
|
key.column_net: GP6
|
||||||
|
key.neighbor_col_left: one
|
||||||
|
key.neighbor_col_right: three
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Third letter column (3, E)
|
||||||
|
three:
|
||||||
|
key.column_net: GP5
|
||||||
|
key.neighbor_col_left: two
|
||||||
|
key.neighbor_col_right: four
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Fourth letter column (4, R)
|
||||||
|
four:
|
||||||
|
key.column_net: GP4
|
||||||
|
key.neighbor_col_left: three
|
||||||
|
key.neighbor_col_right: five
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Fifth letter column (5, T)
|
||||||
|
five:
|
||||||
|
key.column_net: GP3
|
||||||
|
key.neighbor_col_left: four
|
||||||
|
key.neighbor_col_right: six
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Sixth letter column (6, Y)
|
||||||
|
six:
|
||||||
|
key.column_net: GP2
|
||||||
|
key.neighbor_col_left: five
|
||||||
|
key.neighbor_col_right: seven
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Seventh letter column (7, U)
|
||||||
|
seven:
|
||||||
|
key.column_net: GP1
|
||||||
|
key.neighbor_col_left: six
|
||||||
|
key.neighbor_col_right: eight
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Eighth letter column (8, I)
|
||||||
|
eight:
|
||||||
|
key.column_net: GP0
|
||||||
|
key.neighbor_col_left: seven
|
||||||
|
key.neighbor_col_right: nine
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Nineth letter column (9, O)
|
||||||
|
nine:
|
||||||
|
key.column_net: GP25
|
||||||
|
key.neighbor_col_left: eight
|
||||||
|
key.neighbor_col_right: ten
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Tenth letter column (0, P)
|
||||||
|
ten:
|
||||||
|
key.column_net: GP24
|
||||||
|
key.neighbor_col_left: nine
|
||||||
|
key.neighbor_col_right: eleven
|
||||||
|
rows.mods.skip: true
|
||||||
|
# Eleventh letter column (-, [)
|
||||||
|
eleven:
|
||||||
|
key.column_net: GP23
|
||||||
|
key.neighbor_col_left: ten
|
||||||
|
key.neighbor_col_right: twelve
|
||||||
|
rows.mods.led_previous_key: thumb_mirror_one_default
|
||||||
|
# Twelfth letter column (=, ])
|
||||||
|
twelve:
|
||||||
|
key.column_net: GP22
|
||||||
|
key.neighbor_col_left: eleven
|
||||||
|
rows.top.led_previous_key: primary_twelve_numbers
|
||||||
|
rows.bottom.led_previous_key: primary_twelve_home
|
||||||
|
|
||||||
|
# Thumb fan
|
||||||
|
thumb:
|
||||||
|
# Position thumb keys based on the (non-existant) third key in the modifier row
|
||||||
|
anchor:
|
||||||
|
ref: primary_two_mods
|
||||||
|
shift: [ 2, 0 ]
|
||||||
|
|
||||||
|
# Rotate the thumb keys around the bottom-left corner of the key
|
||||||
|
key:
|
||||||
|
row_net: GP13
|
||||||
|
tags: [ is_key, flip_led ]
|
||||||
|
origin: [ -0.5cx, -0.5cy ]
|
||||||
|
splay: -4
|
||||||
|
|
||||||
|
# Define thumb keys
|
||||||
|
columns:
|
||||||
|
one:
|
||||||
|
key.column_net: GP6
|
||||||
|
key.mirror.column_net: GP24
|
||||||
|
key.led_previous_key: primary_one_mods
|
||||||
|
key.mirror.led_previous_key: thumb_mirror_two_default
|
||||||
|
two:
|
||||||
|
key.column_net: GP5
|
||||||
|
key.mirror.column_net: GP25
|
||||||
|
key.led_previous_key: thumb_one_default
|
||||||
|
key.mirror.led_previous_key: thumb_mirror_three_default
|
||||||
|
three:
|
||||||
|
key.column_net: GP4
|
||||||
|
key.mirror.column_net: GP0
|
||||||
|
key.led_previous_key: thumb_two_default
|
||||||
|
key.mirror.led_previous_key: thumb_mirror_four_default
|
||||||
|
four:
|
||||||
|
key.column_net: GP3
|
||||||
|
key.mirror.column_net: GP1
|
||||||
|
key.led_previous_key: thumb_three_default
|
||||||
|
key.mirror.led_previous_key: thumb_four_default
|
||||||
|
|
||||||
|
# Mirror the thumb fan
|
||||||
|
mirror:
|
||||||
|
ref: primary_five_numbers
|
||||||
|
shift: [ 0.5cx, 0.5cx ]
|
||||||
|
distance: 1cx
|
||||||
|
|
||||||
|
# Function key row above the primary zone (Esc + 8 more keys)
|
||||||
|
# (Note that the keys are only named "f[1-8]" for convenience and are not a full set of F1-F12 keys. They can be
|
||||||
|
# used as F-keys when needed, but will more likely be used for macros and other special functions.)
|
||||||
|
function:
|
||||||
|
# Position function key row above primary zone with 3mm of vertical offset
|
||||||
|
anchor:
|
||||||
|
ref: primary_zero_numbers
|
||||||
|
shift: [ 0, cy + function_zone_offset ]
|
||||||
|
|
||||||
|
key:
|
||||||
|
row_net: GP12
|
||||||
|
|
||||||
|
# Define function keys
|
||||||
|
columns:
|
||||||
|
# Escape key
|
||||||
|
esc:
|
||||||
|
key.column_net: GP8
|
||||||
|
key.led_previous_key: function_f1_default
|
||||||
|
|
||||||
|
# Block of 4 keys with 6mm offset
|
||||||
|
f1:
|
||||||
|
key.spread: cx + 6
|
||||||
|
key.column_net: GP7
|
||||||
|
key.led_previous_key: function_f2_default
|
||||||
|
f2:
|
||||||
|
key.column_net: GP6
|
||||||
|
key.led_previous_key: function_f3_default
|
||||||
|
f3:
|
||||||
|
key.column_net: GP5
|
||||||
|
key.led_previous_key: function_f4_default
|
||||||
|
f4:
|
||||||
|
key.column_net: GP4
|
||||||
|
key.led_previous_key: function_f5_default
|
||||||
|
|
||||||
|
# Block of 4 keys with 6mm offset
|
||||||
|
f5:
|
||||||
|
key.spread: cx + 6
|
||||||
|
key.column_net: GP3
|
||||||
|
key.led_previous_key: function_f6_default
|
||||||
|
f6:
|
||||||
|
key.column_net: GP2
|
||||||
|
key.led_previous_key: function_f7_default
|
||||||
|
f7:
|
||||||
|
key.column_net: GP1
|
||||||
|
key.led_previous_key: function_f8_default
|
||||||
|
f8:
|
||||||
|
key.column_net: GP0
|
||||||
|
key.led_previous_key: status_led
|
||||||
|
|
||||||
|
# Additional points for special components in the upper right corner: Status LED, reset button, rotary encoder
|
||||||
|
special:
|
||||||
|
# Align points with the function key zone
|
||||||
|
anchor:
|
||||||
|
ref: primary_ten_numbers
|
||||||
|
shift: [ 0, cy + function_zone_offset ]
|
||||||
|
|
||||||
|
# These are not actually keys
|
||||||
|
key:
|
||||||
|
tags: [ no_key ]
|
||||||
|
|
||||||
|
# Define points
|
||||||
|
columns:
|
||||||
|
# Neopixel status LED (first in the chain, see comment in PCB footprints for details)
|
||||||
|
status_led:
|
||||||
|
key:
|
||||||
|
width: 3.4
|
||||||
|
height: 3.0
|
||||||
|
|
||||||
|
# Reset button
|
||||||
|
reset_button:
|
||||||
|
key:
|
||||||
|
shift: [ -0.25cx - 1, 0 ]
|
||||||
|
width: 6.5
|
||||||
|
height: 6.5
|
||||||
|
|
||||||
|
# Rotary encoder in the upper right corner
|
||||||
|
rotary:
|
||||||
|
key:
|
||||||
|
row_net: GP12
|
||||||
|
column_net: GP22
|
||||||
|
shift: [ -0.25cx, 0 ]
|
||||||
|
width: 20.5
|
||||||
|
height: 20.5
|
||||||
|
tags: [ is_rotary_encoder ]
|
||||||
|
|
||||||
|
# Generate outlines that can be used in the PCB and for 3D models
|
||||||
|
outlines:
|
||||||
|
# Outline of the key caps
|
||||||
|
keys:
|
||||||
|
- what: rectangle
|
||||||
|
where: is_key
|
||||||
|
size: [ kcx, kcy ]
|
||||||
|
|
||||||
|
# Rotary encoder with knob (2cm)
|
||||||
|
rotary_encoder:
|
||||||
|
- what: rectangle
|
||||||
|
operation: stack
|
||||||
|
size: [ 14, 14 ]
|
||||||
|
- what: circle
|
||||||
|
operation: stack
|
||||||
|
radius: 10
|
||||||
|
|
||||||
|
# Outline for the PCB
|
||||||
|
board:
|
||||||
|
- what: polygon
|
||||||
|
points:
|
||||||
|
- ref: primary_zero_numbers
|
||||||
|
shift: [ -0.5cx, 1.5cy + function_zone_offset ]
|
||||||
|
- ref: primary_twelve_numbers
|
||||||
|
shift: [ 0.5cx, 1.5cy + function_zone_offset ]
|
||||||
|
- ref: primary_twelve_mods
|
||||||
|
shift: [ 0.5cx, -0.5cy ]
|
||||||
|
- ref: mirror_thumb_four
|
||||||
|
shift: [ 0.5cx, -0.5cy ]
|
||||||
|
- ref: thumb_four
|
||||||
|
shift: [ 0.5cx, -0.5cy ]
|
||||||
|
- ref: primary_zero_mods
|
||||||
|
shift: [ -0.5cx, -0.5cy ]
|
||||||
|
expand: 6
|
||||||
|
|
||||||
|
# Preview version of board with key caps and components for visualization
|
||||||
|
board_preview:
|
||||||
|
- board
|
||||||
|
- ^keys
|
||||||
|
# RP2040 controller board
|
||||||
|
- what: rectangle
|
||||||
|
operation: stack
|
||||||
|
where: primary_eleven_numbers
|
||||||
|
size: [ 54, 20 ]
|
||||||
|
adjust.shift: [ 0, cy + function_zone_offset ]
|
||||||
|
# Status LED
|
||||||
|
- what: rectangle
|
||||||
|
operation: stack
|
||||||
|
where: special_status_led
|
||||||
|
size: [ 3.4, 3.0 ]
|
||||||
|
# Reset button
|
||||||
|
- what: rectangle
|
||||||
|
operation: stack
|
||||||
|
where: special_reset_button
|
||||||
|
size: [ 6.5, 6.5 ]
|
||||||
|
# Rotary encoder
|
||||||
|
- what: outline
|
||||||
|
name: rotary_encoder
|
||||||
|
operation: stack
|
||||||
|
where: is_rotary_encoder
|
||||||
|
|
||||||
|
# Cutouts for the switches
|
||||||
|
switch_cutouts:
|
||||||
|
- what: rectangle
|
||||||
|
where: true
|
||||||
|
size: 14
|
||||||
|
|
||||||
|
# Board outline with switch cutouts
|
||||||
|
switch_plate:
|
||||||
|
- board
|
||||||
|
- -switch_cutouts
|
||||||
|
|
||||||
|
# Generate the PCB
|
||||||
|
pcbs:
|
||||||
|
eepyboard:
|
||||||
|
outlines:
|
||||||
|
main:
|
||||||
|
outline: board
|
||||||
|
|
||||||
|
footprints:
|
||||||
|
controller:
|
||||||
|
what: rp2040_purple
|
||||||
|
where:
|
||||||
|
ref: primary_eleven_numbers
|
||||||
|
shift: [ 0, cy + function_zone_offset ]
|
||||||
|
rotate: 90
|
||||||
|
params:
|
||||||
|
orientation: down
|
||||||
|
# Use VBUS (5V from USB) as VCC net
|
||||||
|
VBUS: VCC
|
||||||
|
|
||||||
|
choc_hotswap:
|
||||||
|
what: choc_pretty
|
||||||
|
where: is_key
|
||||||
|
# Rotate footprint so that the hotswap socket is at the bottom and the LED can be at the top
|
||||||
|
adjust.rotate: 180
|
||||||
|
params:
|
||||||
|
keycaps: true
|
||||||
|
hotswap: true
|
||||||
|
from: "{{colrow}}"
|
||||||
|
to: "{{column_net}}"
|
||||||
|
|
||||||
|
diode:
|
||||||
|
what: diode_smd
|
||||||
|
where: is_key
|
||||||
|
adjust:
|
||||||
|
shift: [ 7, -7 ]
|
||||||
|
rotate: 90
|
||||||
|
resist: true
|
||||||
|
params:
|
||||||
|
side: B
|
||||||
|
from: "{{colrow}}"
|
||||||
|
to: "{{row_net}}"
|
||||||
|
|
||||||
|
rotary_encoder:
|
||||||
|
what: rotary_modified
|
||||||
|
where: is_rotary_encoder
|
||||||
|
params:
|
||||||
|
from: "{{colrow}}"
|
||||||
|
to: "{{column_net}}"
|
||||||
|
A: GP10
|
||||||
|
B: GP11
|
||||||
|
C: GND
|
||||||
|
|
||||||
|
diode_rotary_encoder:
|
||||||
|
$extends: pcbs.eepyboard.footprints.diode
|
||||||
|
where: is_rotary_encoder
|
||||||
|
adjust:
|
||||||
|
shift: [ 0, 0 ]
|
||||||
|
rotate: 0
|
||||||
|
|
||||||
|
led_chip:
|
||||||
|
what: sk6812_mini_e
|
||||||
|
# Place unrotated LEDs in all rows without the flip_led tag
|
||||||
|
where: [ [ is_key, -flip_led ] ]
|
||||||
|
# Position LEDs on the LED hole in the Choc switches
|
||||||
|
adjust:
|
||||||
|
shift: [ 0, 4.7 ]
|
||||||
|
params:
|
||||||
|
side: B
|
||||||
|
din: "led_dout_{{led_previous_key}}"
|
||||||
|
dout: "led_dout_{{zone.name}}_{{colrow}}"
|
||||||
|
|
||||||
|
led_capacitor:
|
||||||
|
what: cap_0805
|
||||||
|
where: [ [ is_key, -flip_led ] ]
|
||||||
|
adjust:
|
||||||
|
shift: [ -6, 4.5 ]
|
||||||
|
rotate: 90
|
||||||
|
resist: true
|
||||||
|
params:
|
||||||
|
side: B
|
||||||
|
from: VCC
|
||||||
|
to: GND
|
||||||
|
|
||||||
|
led_chip_flipped:
|
||||||
|
$extends: pcbs.eepyboard.footprints.led_chip
|
||||||
|
# Place flipped (rotated by 180°) LEDs in all rows *with* the flip_led tag
|
||||||
|
where: [ [ is_key, flip_led ] ]
|
||||||
|
adjust.rotate: 180
|
||||||
|
|
||||||
|
led_capacitor_flipped:
|
||||||
|
$extends: pcbs.eepyboard.footprints.led_capacitor
|
||||||
|
where: [ [ is_key, flip_led ] ]
|
||||||
|
adjust:
|
||||||
|
shift: [ 6, 4.9 ]
|
||||||
|
rotate: 270
|
||||||
|
resist: true
|
||||||
|
|
||||||
|
# Additional first LED (not bound to a key) that serves as a status LED.
|
||||||
|
# Additionally, it runs on a reduced voltage to serve as a level converter for the next LED: The RP2040 runs on
|
||||||
|
# 3.3V, but the SK6812 runs on 5V and requires at least 3.5V (5V * 0.7) for the control signal. By reducing the
|
||||||
|
# power voltage with a diode, the threshold is reduced as well, so that the signal of the RP2040 is strong enough.
|
||||||
|
status_led_chip:
|
||||||
|
what: sk6812_mini_e
|
||||||
|
where: special_status_led
|
||||||
|
params:
|
||||||
|
side: B
|
||||||
|
VCC: VCC_status_led
|
||||||
|
din: GP9
|
||||||
|
dout: led_dout_status_led
|
||||||
|
|
||||||
|
status_led_capacitor:
|
||||||
|
what: cap_0805
|
||||||
|
where: special_status_led
|
||||||
|
adjust:
|
||||||
|
shift: [ -6, -0.2 ]
|
||||||
|
rotate: 90
|
||||||
|
params:
|
||||||
|
side: B
|
||||||
|
from: VCC_status_led
|
||||||
|
to: GND
|
||||||
|
|
||||||
|
# Diode to reduce the voltage of the first LED chip by ~0.7V
|
||||||
|
status_led_diode:
|
||||||
|
what: diode_smd
|
||||||
|
where: special_status_led
|
||||||
|
adjust:
|
||||||
|
shift: [ 0, 3.5 ]
|
||||||
|
rotate: 0
|
||||||
|
params:
|
||||||
|
side: B
|
||||||
|
from: VCC
|
||||||
|
to: VCC_status_led
|
||||||
|
|
||||||
|
reset_button:
|
||||||
|
what: button_6x6
|
||||||
|
where: special_reset_button
|
||||||
|
params:
|
||||||
|
from: GND
|
||||||
|
to: RUN
|
||||||
|
|
@ -1,142 +0,0 @@
|
||||||
# Ergogen config for the eepyBoard
|
|
||||||
#
|
|
||||||
# Reference information:
|
|
||||||
# - Keycap size (FK MBK keycaps): 17.5mm x 16.5mm
|
|
||||||
|
|
||||||
# Define units and default values used throughout this file
|
|
||||||
units:
|
|
||||||
# Redefine choc units (keycap size + 1mm clearance)
|
|
||||||
cx: 18.5
|
|
||||||
cy: 17.5
|
|
||||||
|
|
||||||
# Size of key rectangle in demo view (keycap size)
|
|
||||||
$default_width: cx-1
|
|
||||||
$default_height: cy-1
|
|
||||||
|
|
||||||
# Actual spacing of keys
|
|
||||||
$default_spread: cx
|
|
||||||
$default_padding: cy
|
|
||||||
|
|
||||||
# Define the points (i.e. keys)
|
|
||||||
points:
|
|
||||||
zones:
|
|
||||||
# Primary keyboard zone
|
|
||||||
primary:
|
|
||||||
# Key rows (from bottom to top)
|
|
||||||
rows:
|
|
||||||
# Modifier row (Ctrl, ..., but excluding the thumb keys)
|
|
||||||
mod:
|
|
||||||
# Bottom letter row (Shift, Backspace, ZXCV...)
|
|
||||||
bottom:
|
|
||||||
# Middle letter row (Esc, ASDFG...)
|
|
||||||
home:
|
|
||||||
# Top letter row (Tab, QWERT...)
|
|
||||||
top:
|
|
||||||
# Number row (`, 12345...)
|
|
||||||
num:
|
|
||||||
|
|
||||||
# Key columns (from left to right)
|
|
||||||
columns:
|
|
||||||
# Left-most column (`, Tab, Esc, Shift, Ctrl)
|
|
||||||
outer:
|
|
||||||
key.stagger: 0.25cy
|
|
||||||
|
|
||||||
# First letter column (1, QA, ...)
|
|
||||||
one:
|
|
||||||
key.stagger: 0.25cy
|
|
||||||
|
|
||||||
# Second letter column (2, WSZ)
|
|
||||||
two:
|
|
||||||
rows.mod.skip: true
|
|
||||||
|
|
||||||
# Third letter column (3, EDX)
|
|
||||||
three:
|
|
||||||
rows.mod.skip: true
|
|
||||||
|
|
||||||
# Fourth letter column (4, RFC)
|
|
||||||
four:
|
|
||||||
rows.mod.skip: true
|
|
||||||
key.stagger: -0.25cy
|
|
||||||
|
|
||||||
# Fifth letter column (5, TGV)
|
|
||||||
five:
|
|
||||||
rows.mod.skip: true
|
|
||||||
key.stagger: -0.25cy
|
|
||||||
|
|
||||||
# Thumb fan
|
|
||||||
thumb:
|
|
||||||
# Position thumb keys based on the (non-existant) third key in the modifier row
|
|
||||||
anchor:
|
|
||||||
ref: primary_three_mod
|
|
||||||
shift: [ -0.5cx, -0.25cy ]
|
|
||||||
|
|
||||||
# Rotate the thumb keys around the bottom-left corner of the key
|
|
||||||
key:
|
|
||||||
origin: [ -0.5cx, -0.5cy ]
|
|
||||||
splay: -8
|
|
||||||
|
|
||||||
# Define thumb keys
|
|
||||||
columns:
|
|
||||||
one:
|
|
||||||
two:
|
|
||||||
three:
|
|
||||||
four:
|
|
||||||
|
|
||||||
# Mirror the board with a distance of 1 key between the upper corners
|
|
||||||
mirror:
|
|
||||||
ref: primary_five_num
|
|
||||||
shift: [ 0.5cx, 0.5cx ]
|
|
||||||
distance: 1cx
|
|
||||||
|
|
||||||
# Slightly rotate each half of the keyboard
|
|
||||||
rotate: -8
|
|
||||||
|
|
||||||
# Generate outlines that can be used in the PCB and for 3D models
|
|
||||||
outlines:
|
|
||||||
# Outline of the key caps (like the demo preview; used for debugging)
|
|
||||||
_keys:
|
|
||||||
- what: rectangle
|
|
||||||
where: true
|
|
||||||
size: [ cx-1, cy-1 ]
|
|
||||||
|
|
||||||
# Outline for the PCB
|
|
||||||
board:
|
|
||||||
- what: polygon
|
|
||||||
points:
|
|
||||||
- ref: primary_outer_num
|
|
||||||
shift: [ -0.5cx, 0.75cy ]
|
|
||||||
- ref: primary_five_num
|
|
||||||
shift: [ 0.5cx, 1.0cy ]
|
|
||||||
- ref: mirror_primary_five_num
|
|
||||||
shift: [ 0.5cx, 1.0cy ]
|
|
||||||
- ref: mirror_primary_outer_num
|
|
||||||
shift: [ -0.5cx, 0.75cy ]
|
|
||||||
- ref: mirror_primary_outer_mod
|
|
||||||
shift: [ -0.5cx, -0.5cy ]
|
|
||||||
- ref: mirror_thumb_one
|
|
||||||
shift: [ -0.5cx, -0.5cy ]
|
|
||||||
- ref: mirror_thumb_four
|
|
||||||
shift: [ 0.5cx, -0.5cy ]
|
|
||||||
- ref: thumb_four
|
|
||||||
shift: [ 0.5cx, -0.5cy ]
|
|
||||||
- ref: thumb_one
|
|
||||||
shift: [ -0.5cx, -0.5cy ]
|
|
||||||
- ref: primary_outer_mod
|
|
||||||
shift: [ -0.5cx, -0.5cy ]
|
|
||||||
expand: 2
|
|
||||||
|
|
||||||
# Debug version of board with key caps for visualization
|
|
||||||
board_debug:
|
|
||||||
- board
|
|
||||||
- ^_keys
|
|
||||||
|
|
||||||
# Cutouts for the switches
|
|
||||||
switch_cutouts:
|
|
||||||
- what: rectangle
|
|
||||||
where: true
|
|
||||||
size: 14
|
|
||||||
|
|
||||||
# Board outline with switch cutouts
|
|
||||||
switch_plate:
|
|
||||||
- board
|
|
||||||
- -switch_cutouts
|
|
||||||
|
|
@ -0,0 +1,48 @@
|
||||||
|
// Tactile button 6x6mm
|
||||||
|
// Source: https://kicad.github.io/footprints/Button_Switch_SMD
|
||||||
|
module.exports = {
|
||||||
|
params: {
|
||||||
|
designator: 'B',
|
||||||
|
side: 'F',
|
||||||
|
from: undefined,
|
||||||
|
to: undefined
|
||||||
|
},
|
||||||
|
body: p => `
|
||||||
|
(module SW_Push_1P1T_NO_6x6mm_H9.5mm (layer F.Cu) (tedit 5CA1CA7F)
|
||||||
|
(descr "tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm")
|
||||||
|
(tags "tact sw push 6mm smd")
|
||||||
|
(attr smd)
|
||||||
|
|
||||||
|
${p.at /* parametric position */}
|
||||||
|
|
||||||
|
${'' /* footprint reference */}
|
||||||
|
(fp_text reference "${p.ref}" (at 0 -4.05) (layer F.SilkS) ${p.ref_hide} (effects (font (size 1 1) (thickness 0.15))))
|
||||||
|
(fp_text value "" (at 0 4.15) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))))
|
||||||
|
|
||||||
|
${'' /* outline */}
|
||||||
|
(fp_line (start -3 -3 ) (end -3 3 ) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
(fp_line (start -3 3 ) (end 3 3 ) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
(fp_line (start 3 3 ) (end 3 -3 ) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
(fp_line (start 3 -3 ) (end -3 -3 ) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
(fp_line (start 5 3.25) (end 5 -3.25) (layer ${p.side}.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start -5 -3.25) (end -5 3.25) (layer ${p.side}.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start -5 3.25) (end 5 3.25) (layer ${p.side}.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start -5 -3.25) (end 5 -3.25) (layer ${p.side}.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start 3.23 -3.23) (end 3.23 -3.2 ) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start 3.23 3.23) (end 3.23 3.2 ) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -3.23 3.23) (end -3.23 3.2 ) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -3.23 -3.2 ) (end -3.23 -3.23) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start 3.23 -1.3 ) (end 3.23 1.3 ) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -3.23 -3.23) (end 3.23 -3.23) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -3.23 -1.3 ) (end -3.23 1.3 ) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -3.23 3.23) (end 3.23 3.23) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_circle (center 0 0) (end 1.75 -0.05) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
|
||||||
|
${'' /* pins */}
|
||||||
|
(pad 1 smd rect (at -3.975 -2.25 ${p.r}) (size 1.55 1.3) (layers ${p.side}.Cu ${p.side}.Paste ${p.side}.Mask) ${p.from})
|
||||||
|
(pad 1 smd rect (at 3.975 -2.25 ${p.r}) (size 1.55 1.3) (layers ${p.side}.Cu ${p.side}.Paste ${p.side}.Mask) ${p.from})
|
||||||
|
(pad 2 smd rect (at -3.975 2.25 ${p.r}) (size 1.55 1.3) (layers ${p.side}.Cu ${p.side}.Paste ${p.side}.Mask) ${p.to})
|
||||||
|
(pad 2 smd rect (at 3.975 2.25 ${p.r}) (size 1.55 1.3) (layers ${p.side}.Cu ${p.side}.Paste ${p.side}.Mask) ${p.to})
|
||||||
|
)
|
||||||
|
`
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,37 @@
|
||||||
|
module.exports = {
|
||||||
|
params: {
|
||||||
|
designator: 'C',
|
||||||
|
side: 'F',
|
||||||
|
from: undefined,
|
||||||
|
to: undefined
|
||||||
|
},
|
||||||
|
body: p => `
|
||||||
|
(module C_0805_2012Metric (layer ${p.side}.Cu) (tedit 5F68FEEE)
|
||||||
|
${p.at /* parametric position */}
|
||||||
|
|
||||||
|
${'' /* footprint reference */}
|
||||||
|
(fp_text reference "${p.ref}" (at 0 0) (layer ${p.side}.SilkS) ${p.ref_hide} (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
(fp_text value "" (at 0 0) (layer ${p.side}.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
|
||||||
|
${''/* capacitor symbols */}
|
||||||
|
(fp_line (start -1 0.625) (end -1 -0.625) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
(fp_line (start -1 -0.625) (end 1 -0.625) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
(fp_line (start 1 -0.625) (end 1 0.625) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
(fp_line (start 1 0.625) (end -1 0.625) (layer ${p.side}.Fab) (width 0.1))
|
||||||
|
(fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer ${p.side}.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -1.7 0.98) (end -1.7 -0.98) (layer ${p.side}.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start -1.7 -0.98) (end 1.7 -0.98) (layer ${p.side}.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start 1.7 -0.98) (end 1.7 0.98) (layer ${p.side}.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start 1.7 0.98) (end -1.7 0.98) (layer ${p.side}.CrtYd) (width 0.05))
|
||||||
|
|
||||||
|
${''/* SMD pads */}
|
||||||
|
(pad 1 smd roundrect (at -0.95 0 ${p.r}) (size 1 1.45) (layers ${p.side}.Cu ${p.side}.Mask ${p.side}.Paste)
|
||||||
|
(roundrect_rratio 0.25) ${p.to}
|
||||||
|
)
|
||||||
|
(pad 2 smd roundrect (at 0.95 0 ${p.r}) (size 1 1.45) (layers ${p.side}.Cu ${p.side}.Mask ${p.side}.Paste)
|
||||||
|
(roundrect_rratio 0.25) ${p.from}
|
||||||
|
)
|
||||||
|
)
|
||||||
|
`
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,149 @@
|
||||||
|
// Modified version of choc.js
|
||||||
|
// Source for modifications: https://github.com/daprice/keyswitches.pretty/blob/master/Kailh_socket_PG1350.kicad_mod
|
||||||
|
// ---------------------------
|
||||||
|
// Kailh Choc PG1350
|
||||||
|
// Nets
|
||||||
|
// from: corresponds to pin 1
|
||||||
|
// to: corresponds to pin 2
|
||||||
|
// Params
|
||||||
|
// hotswap: default is false
|
||||||
|
// if true, will include holes and pads for Kailh choc hotswap sockets
|
||||||
|
// reverse: default is false
|
||||||
|
// if true, will flip the footprint such that the pcb can be reversible
|
||||||
|
// keycaps: default is false
|
||||||
|
// if true, will add choc sized keycap box around the footprint
|
||||||
|
//
|
||||||
|
// note: hotswap and reverse can be used simultaneously
|
||||||
|
|
||||||
|
module.exports = {
|
||||||
|
params: {
|
||||||
|
designator: 'S',
|
||||||
|
hotswap: false,
|
||||||
|
reverse: false,
|
||||||
|
keycaps: false,
|
||||||
|
from: undefined,
|
||||||
|
to: undefined,
|
||||||
|
},
|
||||||
|
body: p => {
|
||||||
|
const standard = `
|
||||||
|
(module PG1350 (layer F.Cu) (tedit 5DD50112)
|
||||||
|
${p.at /* parametric position */}
|
||||||
|
|
||||||
|
${'' /* footprint reference */}
|
||||||
|
(fp_text reference "${p.ref}" (at 0 0) (layer F.SilkS) ${p.ref_hide} (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
(fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
|
||||||
|
${'' /* LED hole marks */}
|
||||||
|
(fp_line (start -2.6 3.1) (end 2.6 3.1) (layer Dwgs.User) (width 0.15))
|
||||||
|
(fp_line (start 2.6 3.1) (end 2.6 6.3) (layer Dwgs.User) (width 0.15))
|
||||||
|
(fp_line (start 2.6 6.3) (end -2.6 6.3) (layer Dwgs.User) (width 0.15))
|
||||||
|
(fp_line (start -2.6 3.1) (end -2.6 6.3) (layer Dwgs.User) (width 0.15))
|
||||||
|
|
||||||
|
${'' /* middle shaft */}
|
||||||
|
(pad "" np_thru_hole circle (at 0 0) (size 3.429 3.429) (drill 3.429) (layers *.Cu *.Mask))
|
||||||
|
|
||||||
|
${'' /* stabilizers */}
|
||||||
|
(pad "" np_thru_hole circle (at 5.5 0) (size 1.7018 1.7018) (drill 1.7018) (layers *.Cu *.Mask))
|
||||||
|
(pad "" np_thru_hole circle (at -5.5 0) (size 1.7018 1.7018) (drill 1.7018) (layers *.Cu *.Mask))
|
||||||
|
`;
|
||||||
|
|
||||||
|
const keycap = `
|
||||||
|
${'' /* keycap marks */}
|
||||||
|
(fp_line (start -9 -8.5) (end 9 -8.5) (layer Dwgs.User) (width 0.15))
|
||||||
|
(fp_line (start 9 -8.5) (end 9 8.5) (layer Dwgs.User) (width 0.15))
|
||||||
|
(fp_line (start 9 8.5) (end -9 8.5) (layer Dwgs.User) (width 0.15))
|
||||||
|
(fp_line (start -9 8.5) (end -9 -8.5) (layer Dwgs.User) (width 0.15))
|
||||||
|
`;
|
||||||
|
|
||||||
|
function switch_marks(reversed) {
|
||||||
|
let def_side = reversed ? 'F' : 'B';
|
||||||
|
|
||||||
|
return `
|
||||||
|
${'' /* switch marks */}
|
||||||
|
(fp_line (start -7 -7) (end 7 -7) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start 7 -7) (end 7 7) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start 7 7) (end -7 7) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start -7 7) (end -7 -7) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
`;
|
||||||
|
}
|
||||||
|
|
||||||
|
function pins(reversed) {
|
||||||
|
let def_neg = reversed ? '' : '-';
|
||||||
|
let def_pos = reversed ? '-' : '';
|
||||||
|
let def_side = reversed ? 'F' : 'B';
|
||||||
|
let def_pin1 = reversed ? p.to : p.from;
|
||||||
|
let def_pin2 = reversed ? p.from : p.to;
|
||||||
|
|
||||||
|
if (p.hotswap) {
|
||||||
|
return `
|
||||||
|
${'' /* hotswap socket marks */}
|
||||||
|
(fp_line (start ${def_pos}7 -5.6) (end ${def_pos}7 -6.2) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}1.5 -3.7) (end ${def_pos}1 -3.7) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_arc (start ${def_pos}1 -2.2) (end ${def_pos}2.5 -2.2) (angle ${def_neg}90) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}1.5 -8.2) (end ${def_pos}2 -7.7) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}2 -6.7) (end ${def_pos}2 -7.7) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}7 -6.2) (end ${def_pos}2.5 -6.2) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}2 -4.2) (end ${def_neg}1.5 -3.7) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}2 -7.7) (end ${def_neg}1.5 -8.2) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}1.5 -8.2) (end ${def_pos}1.5 -8.2) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_arc (start ${def_pos}2.5 -6.7) (end ${def_pos}2 -6.7) (angle ${def_neg}90) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}2.5 -2.2) (end ${def_pos}2.5 -1.5) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}2.5 -1.5) (end ${def_pos}7 -1.5) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}7 -1.5) (end ${def_pos}7 -2 ) (layer ${def_side}.SilkS) (width 0.15))
|
||||||
|
|
||||||
|
(fp_arc (start ${def_pos}2.5 -6.7 ) (end ${def_pos}2 -6.7 ) (angle ${def_neg}90) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}1.5 -8.2 ) (end ${def_pos}1.5 -8.2 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}2 -7.7 ) (end ${def_neg}1.5 -8.2 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}1.5 -3.7 ) (end ${def_pos}1 -3.7 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}2 -4.2 ) (end ${def_neg}1.5 -3.7 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}7 -6.2 ) (end ${def_pos}2.5 -6.2 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}2 -6.7 ) (end ${def_pos}2 -7.7 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}1.5 -8.2 ) (end ${def_pos}2 -7.7 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_arc (start ${def_pos}1 -2.2 ) (end ${def_pos}2.5 -2.2 ) (angle ${def_neg}90) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}2.5 -1.5 ) (end ${def_pos}7 -1.5 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_pos}2.5 -2.2 ) (end ${def_pos}2.5 -1.5 ) (layer ${def_side}.Fab) (width 0.15))
|
||||||
|
(fp_line (start ${def_neg}2 -4.25) (end ${def_neg}2 -7.7 ) (layer ${def_side}.Fab) (width 0.12))
|
||||||
|
(fp_line (start ${def_pos}7 -1.5 ) (end ${def_pos}7 -6.2 ) (layer ${def_side}.Fab) (width 0.12))
|
||||||
|
(fp_line (start ${def_pos}7 -5 ) (end ${def_pos}9.5 -5 ) (layer ${def_side}.Fab) (width 0.12))
|
||||||
|
(fp_line (start ${def_pos}9.5 -5 ) (end ${def_pos}9.5 -2.5 ) (layer ${def_side}.Fab) (width 0.12))
|
||||||
|
(fp_line (start ${def_pos}9.5 -2.5 ) (end ${def_pos}7 -2.5 ) (layer ${def_side}.Fab) (width 0.12))
|
||||||
|
(fp_line (start ${def_neg}2 -4.75) (end ${def_neg}4.5 -4.75) (layer ${def_side}.Fab) (width 0.12))
|
||||||
|
(fp_line (start ${def_neg}4.5 -4.75) (end ${def_neg}4.5 -7.25) (layer ${def_side}.Fab) (width 0.12))
|
||||||
|
(fp_line (start ${def_neg}4.5 -7.25) (end ${def_neg}2 -7.25) (layer ${def_side}.Fab) (width 0.12))
|
||||||
|
|
||||||
|
${'' /* holes */}
|
||||||
|
(pad "" np_thru_hole circle (at ${def_pos}5 -3.75) (size 3 3) (drill 3) (layers *.Cu *.Mask))
|
||||||
|
(pad "" np_thru_hole circle (at 0 -5.95) (size 3 3) (drill 3) (layers *.Cu *.Mask))
|
||||||
|
|
||||||
|
${'' /* net pads */}
|
||||||
|
(pad 1 smd rect (at ${def_neg}3.275 -5.95 ${p.r}) (size 2.6 2.6) (layers ${def_side}.Cu ${def_side}.Paste ${def_side}.Mask) ${def_pin1})
|
||||||
|
(pad 2 smd rect (at ${def_pos}8.275 -3.75 ${p.r}) (size 2.6 2.6) (layers ${def_side}.Cu ${def_side}.Paste ${def_side}.Mask) ${def_pin2})
|
||||||
|
`;
|
||||||
|
} else {
|
||||||
|
return `
|
||||||
|
${'' /* pins */}
|
||||||
|
(pad 1 thru_hole circle (at ${def_pos}5 -3.8) (size 2.032 2.032) (drill 1.27) (layers *.Cu *.Mask) ${def_pin1})
|
||||||
|
(pad 2 thru_hole circle (at ${def_pos}0 -5.9) (size 2.032 2.032) (drill 1.27) (layers *.Cu *.Mask) ${def_pin2})
|
||||||
|
`;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (p.reverse) {
|
||||||
|
return `
|
||||||
|
${standard}
|
||||||
|
${p.keycaps ? keycap : ''}
|
||||||
|
${switch_marks(false)}
|
||||||
|
${switch_marks(true)}
|
||||||
|
${pins(false)}
|
||||||
|
${pins(true)}
|
||||||
|
)`;
|
||||||
|
} else {
|
||||||
|
return `
|
||||||
|
${standard}
|
||||||
|
${p.keycaps ? keycap : ''}
|
||||||
|
${switch_marks(false)}
|
||||||
|
${pins(false)}
|
||||||
|
)`;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,30 @@
|
||||||
|
module.exports = {
|
||||||
|
params: {
|
||||||
|
designator: 'D',
|
||||||
|
side: 'F',
|
||||||
|
from: undefined,
|
||||||
|
to: undefined
|
||||||
|
},
|
||||||
|
body: p => `
|
||||||
|
(module SmdDiode (layer ${p.side}.Cu) (tedit 65D012FE)
|
||||||
|
${p.at /* parametric position */}
|
||||||
|
|
||||||
|
${'' /* footprint reference */}
|
||||||
|
(fp_text reference "${p.ref}" (at 0 0) (layer ${p.side}.SilkS) ${p.ref_hide} (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
(fp_text value "" (at 0 0) (layer ${p.side}.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
|
||||||
|
${''/* diode symbols */}
|
||||||
|
(fp_line (start 0.25 0) (end 0.75 0) (layer ${p.side}.SilkS) (width 0.1))
|
||||||
|
(fp_line (start 0.25 0.4) (end -0.35 0) (layer ${p.side}.SilkS) (width 0.1))
|
||||||
|
(fp_line (start 0.25 -0.4) (end 0.25 0.4) (layer ${p.side}.SilkS) (width 0.1))
|
||||||
|
(fp_line (start -0.35 0) (end 0.25 -0.4) (layer ${p.side}.SilkS) (width 0.1))
|
||||||
|
(fp_line (start -0.35 0) (end -0.35 0.55) (layer ${p.side}.SilkS) (width 0.1))
|
||||||
|
(fp_line (start -0.35 0) (end -0.35 -0.55) (layer ${p.side}.SilkS) (width 0.1))
|
||||||
|
(fp_line (start -0.75 0) (end -0.35 0) (layer ${p.side}.SilkS) (width 0.1))
|
||||||
|
|
||||||
|
${''/* SMD pads */}
|
||||||
|
(pad 1 smd rect (at -1.65 0 ${p.r}) (size 0.9 1.2) (layers ${p.side}.Cu ${p.side}.Paste ${p.side}.Mask) ${p.to})
|
||||||
|
(pad 2 smd rect (at 1.65 0 ${p.r}) (size 0.9 1.2) (layers ${p.side}.Cu ${p.side}.Paste ${p.side}.Mask) ${p.from})
|
||||||
|
)
|
||||||
|
`
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,75 @@
|
||||||
|
// Modified version of rotary.js, without the mounting legs
|
||||||
|
// --------------------------------------------------------
|
||||||
|
// EC12 rotary encoder
|
||||||
|
//
|
||||||
|
// Params
|
||||||
|
// radius: radius of the knob in mm (only for visualization on User.Drawings)
|
||||||
|
//
|
||||||
|
// Nets
|
||||||
|
// from: corresponds to switch pin 1 (for button presses)
|
||||||
|
// to: corresponds to switch pin 2 (for button presses)
|
||||||
|
// A: corresponds to pin 1 (for rotary)
|
||||||
|
// B: corresponds to pin 3 (for rotary)
|
||||||
|
// C: corresponds to pin 2 (for rotary, should be GND)
|
||||||
|
|
||||||
|
module.exports = {
|
||||||
|
params: {
|
||||||
|
designator: 'ROT',
|
||||||
|
from: undefined,
|
||||||
|
to: undefined,
|
||||||
|
A: undefined,
|
||||||
|
B: undefined,
|
||||||
|
C: undefined,
|
||||||
|
radius: 10,
|
||||||
|
},
|
||||||
|
body: p => `
|
||||||
|
(module rotary_encoder (layer F.Cu) (tedit 603326DE)
|
||||||
|
|
||||||
|
${p.at /* parametric position */}
|
||||||
|
|
||||||
|
${'' /* footprint reference */}
|
||||||
|
(fp_text reference "${p.ref}" (at 0 0.5) (layer F.SilkS)
|
||||||
|
${p.ref_hide} (effects (font (size 1 1) (thickness 0.15))))
|
||||||
|
(fp_text value "" (at 0 8.89) (layer F.Fab)
|
||||||
|
(effects (font (size 1 1) (thickness 0.15))))
|
||||||
|
|
||||||
|
${''/* component outline */}
|
||||||
|
(fp_line (start -0.62 -0.04) (end 0.38 -0.04) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -0.12 -0.54) (end -0.12 0.46) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start 5.98 3.26) (end 5.98 5.86) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start 5.98 -1.34) (end 5.98 1.26) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start 5.98 -5.94) (end 5.98 -3.34) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -3.12 -0.04) (end 2.88 -0.04) (layer F.Fab) (width 0.12))
|
||||||
|
(fp_line (start -0.12 -3.04) (end -0.12 2.96) (layer F.Fab) (width 0.12))
|
||||||
|
(fp_line (start -7.32 -4.14) (end -7.62 -3.84) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -7.92 -4.14) (end -7.32 -4.14) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -7.62 -3.84) (end -7.92 -4.14) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -6.22 -5.84) (end -6.22 5.86) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -2.12 -5.84) (end -6.22 -5.84) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -2.12 5.86) (end -6.22 5.86) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start 5.98 5.86) (end 1.88 5.86) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start 1.88 -5.94) (end 5.98 -5.94) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_line (start -6.12 -4.74) (end -5.12 -5.84) (layer F.Fab) (width 0.12))
|
||||||
|
(fp_line (start -6.12 5.76) (end -6.12 -4.74) (layer F.Fab) (width 0.12))
|
||||||
|
(fp_line (start 5.88 5.76) (end -6.12 5.76) (layer F.Fab) (width 0.12))
|
||||||
|
(fp_line (start 5.88 -5.84) (end 5.88 5.76) (layer F.Fab) (width 0.12))
|
||||||
|
(fp_line (start -5.12 -5.84) (end 5.88 -5.84) (layer F.Fab) (width 0.12))
|
||||||
|
(fp_line (start -8.87 -6.89) (end 7.88 -6.89) (layer F.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start -8.87 -6.89) (end -8.87 6.81) (layer F.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start 7.88 6.81) (end 7.88 -6.89) (layer F.CrtYd) (width 0.05))
|
||||||
|
(fp_line (start 7.88 6.81) (end -8.87 6.81) (layer F.CrtYd) (width 0.05))
|
||||||
|
(fp_circle (center -0.12 -0.04) (end 2.88 -0.04) (layer F.SilkS) (width 0.12))
|
||||||
|
(fp_circle (center -0.12 -0.04) (end 2.88 -0.04) (layer F.Fab) (width 0.12))
|
||||||
|
|
||||||
|
${'' /* knob visualization */}
|
||||||
|
(fp_circle (center 0 0) (end ${p.radius} 0) (layer Dwgs.User) (width 0.1))
|
||||||
|
|
||||||
|
${''/* pin names */}
|
||||||
|
(pad A thru_hole rect (at -7.62 -2.54 ${p.r}) (size 2 2) (drill 1) (layers *.Cu *.Mask) ${p.A})
|
||||||
|
(pad C thru_hole circle (at -7.62 -0.04) (size 2 2) (drill 1) (layers *.Cu *.Mask) ${p.C})
|
||||||
|
(pad B thru_hole circle (at -7.62 2.46) (size 2 2) (drill 1) (layers *.Cu *.Mask) ${p.B})
|
||||||
|
(pad 1 thru_hole circle (at 6.88 -2.54) (size 1.5 1.5) (drill 1) (layers *.Cu *.Mask) ${p.from})
|
||||||
|
(pad 2 thru_hole circle (at 6.88 2.46) (size 1.5 1.5) (drill 1) (layers *.Cu *.Mask) ${p.to})
|
||||||
|
)
|
||||||
|
`
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,140 @@
|
||||||
|
// Pin header footprint for a RP2040-based controller board from AliExpress.
|
||||||
|
// Doesn't really have a name, it's just "the purple one with USB-C".
|
||||||
|
// The pinout differs from the Raspberry Pi Pico!
|
||||||
|
// -------------------------------
|
||||||
|
// Params
|
||||||
|
// orientation: if up (default), the controller will be on the front side of the PCB, otherwise on the back side
|
||||||
|
|
||||||
|
module.exports = {
|
||||||
|
params: {
|
||||||
|
designator: 'MCU',
|
||||||
|
orientation: 'up',
|
||||||
|
|
||||||
|
// Right side of pins (with USB port at the top), top to bottom
|
||||||
|
VBUS: {type: 'net', value: 'VBUS'},
|
||||||
|
VIN: {type: 'net', value: 'VIN'},
|
||||||
|
GND: {type: 'net', value: 'GND'},
|
||||||
|
'3V3_EN': {type: 'net', value: '3V3_EN'},
|
||||||
|
'3V3': {type: 'net', value: '3V3'},
|
||||||
|
// (GND pin)
|
||||||
|
RUN: {type: 'net', value: 'RUN'}, // Reset pin: Pull down to reset
|
||||||
|
GP29: {type: 'net', value: 'GP29'}, // also: ADC3
|
||||||
|
GP28: {type: 'net', value: 'GP28'}, // also: ADC2
|
||||||
|
GP27: {type: 'net', value: 'GP27'}, // also: ADC1
|
||||||
|
GP26: {type: 'net', value: 'GP26'}, // also: ADC0
|
||||||
|
AGND: {type: 'net', value: 'AGND'},
|
||||||
|
GP25: {type: 'net', value: 'GP25'},
|
||||||
|
GP24: {type: 'net', value: 'GP24'},
|
||||||
|
GP23: {type: 'net', value: 'GP23'},
|
||||||
|
GP22: {type: 'net', value: 'GP22'},
|
||||||
|
GP21: {type: 'net', value: 'GP21'},
|
||||||
|
GP20: {type: 'net', value: 'GP20'},
|
||||||
|
GP19: {type: 'net', value: 'GP19'},
|
||||||
|
GP18: {type: 'net', value: 'GP18'},
|
||||||
|
|
||||||
|
// Left side of pins (with USB port at the top), top to bottom
|
||||||
|
GP0: {type: 'net', value: 'GP0'},
|
||||||
|
GP1: {type: 'net', value: 'GP1'},
|
||||||
|
GP2: {type: 'net', value: 'GP2'},
|
||||||
|
GP3: {type: 'net', value: 'GP3'},
|
||||||
|
GP4: {type: 'net', value: 'GP4'},
|
||||||
|
// (GND pin)
|
||||||
|
GP5: {type: 'net', value: 'GP5'},
|
||||||
|
GP6: {type: 'net', value: 'GP6'},
|
||||||
|
GP7: {type: 'net', value: 'GP7'},
|
||||||
|
GP8: {type: 'net', value: 'GP8'},
|
||||||
|
GP9: {type: 'net', value: 'GP9'},
|
||||||
|
GP10: {type: 'net', value: 'GP10'},
|
||||||
|
GP11: {type: 'net', value: 'GP11'},
|
||||||
|
GP12: {type: 'net', value: 'GP12'},
|
||||||
|
// (GND pin)
|
||||||
|
GP13: {type: 'net', value: 'GP13'},
|
||||||
|
GP14: {type: 'net', value: 'GP14'},
|
||||||
|
GP15: {type: 'net', value: 'GP15'},
|
||||||
|
GP16: {type: 'net', value: 'GP16'},
|
||||||
|
GP17: {type: 'net', value: 'GP17'},
|
||||||
|
},
|
||||||
|
body: p => {
|
||||||
|
let def_neg, def_pos, side, mirror;
|
||||||
|
if (p.orientation === 'down') {
|
||||||
|
def_neg = '';
|
||||||
|
def_pos = '-';
|
||||||
|
side = 'B';
|
||||||
|
mirror = 'mirror';
|
||||||
|
} else {
|
||||||
|
def_neg = '-';
|
||||||
|
def_pos = '';
|
||||||
|
side = 'F';
|
||||||
|
mirror = '';
|
||||||
|
}
|
||||||
|
|
||||||
|
const PINS_PER_SIDE = 20;
|
||||||
|
const PINS_PER_SIDE_HALF = 10;
|
||||||
|
|
||||||
|
const pins_left = [
|
||||||
|
'GP0', 'GP1', 'GP2', 'GP3', 'GP4', 'GND', 'GP5', 'GP6', 'GP7', 'GP8',
|
||||||
|
'GP9', 'GP10', 'GP11', 'GP12', 'GND', 'GP13', 'GP14', 'GP15', 'GP16', 'GP17',
|
||||||
|
];
|
||||||
|
const pins_right = [
|
||||||
|
'VBUS', 'VIN', 'GND', '3V3_EN', '3V3', 'GND', 'RUN', 'GP29', 'GP28', 'GP27',
|
||||||
|
'GP26', 'AGND', 'GP25', 'GP24', 'GP23', 'GP22', 'GP21', 'GP20', 'GP19', 'GP18',
|
||||||
|
];
|
||||||
|
|
||||||
|
function pin_pos_y(pin_number) {
|
||||||
|
// Fucking floating points...
|
||||||
|
return (254 * (pin_number - PINS_PER_SIDE_HALF) + 127) / 100;
|
||||||
|
}
|
||||||
|
|
||||||
|
function pin_labels(pin_names, right_side) {
|
||||||
|
const sign = right_side ? def_pos : def_neg;
|
||||||
|
const justify = right_side ? 'right' : 'left';
|
||||||
|
let pin_label_body = '';
|
||||||
|
|
||||||
|
for (let i = 0; i < PINS_PER_SIDE; i++) {
|
||||||
|
pin_label_body += `
|
||||||
|
(fp_text user ${pin_names[i]} (at ${sign}7.62 ${pin_pos_y(i)} ${p.r}) (unlocked yes) (layer ${side}.SilkS)
|
||||||
|
(effects (font (size 0.8 0.8) (thickness 0.15)) (justify ${justify} ${mirror}))
|
||||||
|
)`;
|
||||||
|
}
|
||||||
|
return pin_label_body;
|
||||||
|
}
|
||||||
|
|
||||||
|
function pin_pads(pin_names, right_side) {
|
||||||
|
const sign = right_side ? def_pos : def_neg;
|
||||||
|
const offset = right_side ? 21 : 1;
|
||||||
|
let pin_pad_body = '';
|
||||||
|
|
||||||
|
for (let i = 0; i < PINS_PER_SIDE; i++) {
|
||||||
|
pin_pad_body += `
|
||||||
|
(pad ${i + offset} thru_hole circle (at ${sign}8.89 ${pin_pos_y(i)} 0)
|
||||||
|
(size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) ${p[pin_names[i]]}
|
||||||
|
)`;
|
||||||
|
}
|
||||||
|
return pin_pad_body;
|
||||||
|
}
|
||||||
|
|
||||||
|
return `
|
||||||
|
(module RP2040_USB_C_Purple (layer F.Cu) (tedit 66A6C4CD)
|
||||||
|
${p.at /* parametric position */}
|
||||||
|
|
||||||
|
${'' /* footprint reference */}
|
||||||
|
(fp_text reference "${p.ref}" (at 0 0) (layer ${side}.SilkS) ${p.ref_hide} (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
(fp_text value "" (at 0 0) (layer ${side}.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
|
||||||
|
${'' /* component outline */}
|
||||||
|
(fp_line (start -10.16 -28.6) (end 10.16 -28.6) (layer ${side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start 10.16 -28.6) (end 10.16 25.4) (layer ${side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start 10.16 25.4) (end -10.16 25.4) (layer ${side}.SilkS) (width 0.15))
|
||||||
|
(fp_line (start -10.16 25.4) (end -10.16 -28.6) (layer ${side}.SilkS) (width 0.15))
|
||||||
|
|
||||||
|
${'' /* pin labels */}
|
||||||
|
${pin_labels(pins_left, false)}
|
||||||
|
${pin_labels(pins_right, true)}
|
||||||
|
|
||||||
|
${'' /* pin pads */}
|
||||||
|
${pin_pads(pins_left, false)}
|
||||||
|
${pin_pads(pins_right, true)}
|
||||||
|
)
|
||||||
|
`;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,52 @@
|
||||||
|
// Modified version of rgb.js
|
||||||
|
// Source for KiCad footprint: https://github.com/keebio/Keebio-Parts.pretty/blob/master/SK6812-MINI-E.kicad_mod
|
||||||
|
|
||||||
|
module.exports = {
|
||||||
|
params: {
|
||||||
|
designator: 'LED',
|
||||||
|
side: 'F',
|
||||||
|
din: undefined,
|
||||||
|
dout: undefined,
|
||||||
|
VCC: {type: 'net', value: 'VCC'},
|
||||||
|
GND: {type: 'net', value: 'GND'}
|
||||||
|
},
|
||||||
|
body: p => `
|
||||||
|
(module SK6812-MINI-E (layer F.Cu) (tedit 53BEE615)
|
||||||
|
${p.at /* parametric position */}
|
||||||
|
|
||||||
|
${'' /* footprint reference */}
|
||||||
|
(fp_text reference "${p.ref}" (at 0 0) (layer ${p.side}.SilkS) ${p.ref_hide}
|
||||||
|
(effects (font (size 1.27 1.27) (thickness 0.15)))
|
||||||
|
)
|
||||||
|
(fp_text value "" (at 0 0) (layer ${p.side}.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
|
||||||
|
|
||||||
|
(fp_poly (pts (xy 2.8 1.4) (xy 2.2 1.4) (xy 2.2 2)) (layer ${p.side}.SilkS) (width 0.1))
|
||||||
|
(fp_line (start 1.6 -1.4) (end 1.6 1.4) (layer Cmts.User) (width 0.12))
|
||||||
|
(fp_line (start 1.6 1.4) (end -1.6 1.4) (layer Cmts.User) (width 0.12))
|
||||||
|
(fp_line (start -1.6 1.4) (end -1.6 -1.4) (layer Cmts.User) (width 0.12))
|
||||||
|
(fp_line (start -1.6 -1.4) (end 1.6 -1.4) (layer Cmts.User) (width 0.12))
|
||||||
|
(fp_line (start 1.7 -1.5) (end 1.7 1.5) (layer Edge.Cuts) (width 0.12))
|
||||||
|
(fp_line (start 1.7 1.5) (end -1.7 1.5) (layer Edge.Cuts) (width 0.12))
|
||||||
|
(fp_line (start -1.7 1.5) (end -1.7 -1.5) (layer Edge.Cuts) (width 0.12))
|
||||||
|
(fp_line (start -1.7 -1.5) (end 1.7 -1.5) (layer Edge.Cuts) (width 0.12))
|
||||||
|
|
||||||
|
(pad "1" smd rect (at -2.55 -0.75 ${p.r}) (size 1.7 0.82)
|
||||||
|
(layers "${p.side}.Cu" "${p.side}.Paste" "${p.side}.Mask")
|
||||||
|
${p.VCC}
|
||||||
|
)
|
||||||
|
(pad "2" smd rect (at -2.55 0.75 ${p.r}) (size 1.7 0.82)
|
||||||
|
(layers "${p.side}.Cu" "${p.side}.Paste" "${p.side}.Mask")
|
||||||
|
${p.dout}
|
||||||
|
)
|
||||||
|
(pad "4" smd rect (at 2.55 -0.75 ${p.r}) (size 1.7 0.82)
|
||||||
|
(layers "${p.side}.Cu" "${p.side}.Paste" "${p.side}.Mask")
|
||||||
|
${p.din}
|
||||||
|
)
|
||||||
|
(pad "3" smd roundrect (at 2.55 0.75 ${p.r}) (size 1.7 0.82)
|
||||||
|
(layers "${p.side}.Cu" "${p.side}.Paste" "${p.side}.Mask")
|
||||||
|
(roundrect_rratio 0.25)
|
||||||
|
${p.GND}
|
||||||
|
)
|
||||||
|
)
|
||||||
|
`
|
||||||
|
}
|
||||||
|
|
@ -6,7 +6,7 @@
|
||||||
"": {
|
"": {
|
||||||
"name": "eepyboard",
|
"name": "eepyboard",
|
||||||
"dependencies": {
|
"dependencies": {
|
||||||
"ergogen": "4.0.5"
|
"ergogen": "4.1.0"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"node_modules/@babel/runtime": {
|
"node_modules/@babel/runtime": {
|
||||||
|
|
@ -148,9 +148,10 @@
|
||||||
"integrity": "sha512-MSjYzcWNOA0ewAHpz0MxpYFvwg6yjy1NG3xteoqz644VCo/RPgnr1/GGt+ic3iJTzQ8Eu3TdM14SawnVUmGE6A=="
|
"integrity": "sha512-MSjYzcWNOA0ewAHpz0MxpYFvwg6yjy1NG3xteoqz644VCo/RPgnr1/GGt+ic3iJTzQ8Eu3TdM14SawnVUmGE6A=="
|
||||||
},
|
},
|
||||||
"node_modules/ergogen": {
|
"node_modules/ergogen": {
|
||||||
"version": "4.0.5",
|
"version": "4.1.0",
|
||||||
"resolved": "https://registry.npmjs.org/ergogen/-/ergogen-4.0.5.tgz",
|
"resolved": "https://registry.npmjs.org/ergogen/-/ergogen-4.1.0.tgz",
|
||||||
"integrity": "sha512-vrIrMSNEWRpD6N0JpoJzNkZ4agXN+mbAQZ//G+1UdC8thGewlJxhJp2Oxs+pVXHULoVWWi/popPvgRmy8Jq/Zg==",
|
"integrity": "sha512-m5mfbF87tdiBjEE/WsBrNKPm+4ZoYOA+ubPTyy5JVj8+DpDUh4lf/bhxkC/gXXcgJB7SLUmNeCtS9C2ttyzAFg==",
|
||||||
|
"license": "MIT",
|
||||||
"dependencies": {
|
"dependencies": {
|
||||||
"fs-extra": "^11.1.0",
|
"fs-extra": "^11.1.0",
|
||||||
"js-yaml": "^3.14.1",
|
"js-yaml": "^3.14.1",
|
||||||
|
|
|
||||||
|
|
@ -1,12 +1,12 @@
|
||||||
{
|
{
|
||||||
"name": "eepyboard",
|
"name": "eepyboard",
|
||||||
"author": "binaryDiv <eepyboard@binarydiv.dev>",
|
"author": "binaryDiv <keyboards@binarydiv.dev>",
|
||||||
"description": "Dependencies to generate files for the eepyBoard (not an actual node project).",
|
"description": "Dependencies to generate files for the eepyBoard (not an actual node project).",
|
||||||
"private": true,
|
"private": true,
|
||||||
"scripts": {
|
"scripts": {
|
||||||
"ergogen": "ergogen -o ergogen/output ergogen/eepyboard.yml"
|
"ergogen": "ergogen -o ergogen/output ergogen"
|
||||||
},
|
},
|
||||||
"dependencies": {
|
"dependencies": {
|
||||||
"ergogen": "4.0.5"
|
"ergogen": "4.1.0"
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue