# eeprom-programmer

Programming tool for parallel EEPROM chips, based on a ATmega16.

Only supports AT28C256 EEPROM chips as of now.


## Usage

### Using the python tool

(TODO)


### Using the serial terminal

The device uses a baud-rate of 38.4 kbps.
Output lines end with a line feed (LF), input lines may end with LF or CR+LF.

Example for using `picocom` to access the device:

    picocom -b 38400 --imap lfcrlf --echo /dev/ttyUSB0


## Development

### VS Code configuration

Put these lines in `.vscode/settings.json` to enable correct linting and autocompletion.

    {
        "C_Cpp.default.cStandard": "c11",
        "C_Cpp.default.compilerPath": "/usr/bin/avr-gcc",
        "C_Cpp.default.compilerArgs": ["-mmcu=atmega16a"]
    }